Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

4l60 shift problems on nitrous

Thread Tools
 
Search this Thread
 
Old May 11, 2010 | 01:13 PM
  #1  
onthabottle's Avatar
Thread Starter
Teching In
 
Joined: Feb 2010
Posts: 2
Likes: 0
From: dubberly,la
Default 4l60 shift problems on nitrous

im having problems with my car shifting from 2nd to 3rd when im spraying... it shifts perfect off the nitrous but when i spray it bangs the rev limiter like 3 times before it will shift from 2nd to 3rd is this a tranny issue or in the tune?
Reply
Old May 11, 2010 | 01:38 PM
  #2  
dannyz's Avatar
TECH Fanatic
20 Year Member
 
Joined: Oct 2005
Posts: 1,131
Likes: 76
From: olympia, wash
Default

Could be either.
If your running a bigger shot and the tranny's in good shape you need to bring the shift points down.
Do you have an aftermarket stall?
Reply
Old May 11, 2010 | 01:43 PM
  #3  
performabuilt's Avatar
LS1Tech Sponsor
15 Year Member
Liked
Loved
Community Favorite
iTrader: (25)
 
Joined: Aug 2006
Posts: 10,854
Likes: 80
From: BLOOMSBURG PA
Default

Spraying will cause the rpm to rise at a greater rate therefore you need more time from comand to shift since the time it takes to make the shift is a constant reguarless of the rate of rpm increase. Your getting to the limiter on nos before the trans can complete the shift , You will need to compensate in tuning but this will also cause it to shift earlier n/a
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Reply
Old May 12, 2010 | 02:13 PM
  #4  
onthabottle's Avatar
Thread Starter
Teching In
 
Joined: Feb 2010
Posts: 2
Likes: 0
From: dubberly,la
Default

i have a circle d 3600... i was playing with it yesterday and i set the nitrous to cut off 100 rpm sooner then it was set and it shifted perfect so hopefully that fixed it...
Reply
Old May 12, 2010 | 04:12 PM
  #5  
lonely's Avatar
Teching In
 
Joined: Apr 2007
Posts: 38
Likes: 0
From: Kuwait
Default

good job, do you have a video clip for your ride, I want to see how the TC act with the car, also if you can do one with spray, thanks in advance.
Reply




All times are GMT -5. The time now is 09:44 AM.