Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Pcm to control 4l80e trans

Thread Tools
 
Search this Thread
 
Old Jun 10, 2010 | 04:11 PM
  #1  
Cool28's Avatar
Thread Starter
Tire Smoking Tranny Blowing Director
iTrader: (2)
 
Joined: Nov 2001
Posts: 2,130
Likes: 1
From: Barto PA
Default Pcm to control 4l80e trans

Don't really know if this should be in trans or PCM section. I want to put a 4l80e trans into a 98 transam and I read I need a 99 or newer PCM. I can get a hold of a 99 PCM out of a 5.7 chevy truck. Are they the same as a 99 firebird/camaro PCM? If so what would it take to have it work with my firebird? Also read that my fuel gauge wouldn't work with a 99 PCM bow would I get that to work?
Reply
Old Jun 10, 2010 | 04:34 PM
  #2  
slow67's Avatar
Gingervitis Addict
15 Year Member
iTrader: (2)
 
Joined: Nov 2004
Posts: 2,399
Likes: 3
From: DFW
Default

Originally Posted by Cool28
Don't really know if this should be in trans or PCM section. I want to put a 4l80e trans into a 98 transam and I read I need a 99 or newer PCM. I can get a hold of a 99 PCM out of a 5.7 chevy truck. Are they the same as a 99 firebird/camaro PCM? If so what would it take to have it work with my firebird? Also read that my fuel gauge wouldn't work with a 99 PCM bow would I get that to work?
A 98 PCM will control a 4L80. PM me.
Reply
Old Jun 10, 2010 | 04:43 PM
  #3  
Cool28's Avatar
Thread Starter
Tire Smoking Tranny Blowing Director
iTrader: (2)
 
Joined: Nov 2001
Posts: 2,130
Likes: 1
From: Barto PA
Default

I want a 99 though for future upgrades
Reply
Old Jun 10, 2010 | 10:31 PM
  #4  
slow67's Avatar
Gingervitis Addict
15 Year Member
iTrader: (2)
 
Joined: Nov 2004
Posts: 2,399
Likes: 3
From: DFW
Default

It will work if its a 12200411 PCM. You need to completely re-pin the harness. Fuel gauge will work if you get a fuel system segment swap (EFIlLive guys can do it).
Reply
Old Jun 11, 2010 | 06:55 PM
  #5  
Cool28's Avatar
Thread Starter
Tire Smoking Tranny Blowing Director
iTrader: (2)
 
Joined: Nov 2001
Posts: 2,130
Likes: 1
From: Barto PA
Default

Cool thanks. Picked up a 02 PCM from a s10 pickup that was automatic so I should be good to go after some programming
Reply




All times are GMT -5. The time now is 01:50 AM.