Lokar dipstick ?
10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
Mine Lokar passed tech but to be honest i'm not sure if they even looked at it. I now run the Madman dipstick and it is the locking type, and it's way better for filling. The Lokar one was a royal pain in the ***.
HI!
Here's a link to our dipstick tube.
http://www.madmanandcoracing.com/sho...aspx?itemid=13
We have one to fit your application. Give me a call @ 225-673-3533 to order.
Thanks!
Here's a link to our dipstick tube.
http://www.madmanandcoracing.com/sho...aspx?itemid=13
We have one to fit your application. Give me a call @ 225-673-3533 to order.
Thanks!
Trending Topics
s since its a hard line, whats the exact placement of the dipstick when its in place? does it come out just like the stock auto dipstick or what? I have a vic jr intake with a sheet metal elbow and Im concerned it wont work, let me know because ive been looking at your stuff. Thanks
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo 10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
I will get you a pic tomorrow. Basically it mounts onto the bellhousing 2nd bolt up from the bottom. The dipstick angles up right over the passengerside valve cover just a little to the outside. I would bet that it will clear any intake manifold, it's nowhere near the intake. I use a real long funnel to fill it, and it works like a charm. It has the locking style cap that will pass tech inspection. I swapped converters over the weekend and I had it out of the way. I pretty much had the transmission right onto the dowels and I forgot about puttin in the dipstick. I figured I was going to have to lower the transmission down to get it on but it snaked it's way right down the tranny tunnel and into place. Keep in mind I don't have a/c or a heater though so that makes it easy for me.
