Park acting like Neutral!... WTF?!
#1
TECH Addict
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
Park acting like Neutral!... WTF?!
K, this is odd! ... JUST now, parked on a very small (barely visably noticeable) incline. And the car starts gradually rolling backwards even though I'm in park. Threw the e-brake and no difference really. WTF?!!! ... It's like she's in neutral but even if the tranny is craping out, why would the e-brake have almost no effect?
Posting in here because I would like to hear some thoughts as to why it's like 'P' is acting like 'N'. And if so, is there a simple fix.
If anyone wants to add in why the e-brake is having no effect, I'm all ears!
Stock 4L60e, 150K miles(roughly) .. & no previous issues with trans until now.
Posting in here because I would like to hear some thoughts as to why it's like 'P' is acting like 'N'. And if so, is there a simple fix.
If anyone wants to add in why the e-brake is having no effect, I'm all ears!
Stock 4L60e, 150K miles(roughly) .. & no previous issues with trans until now.
#3
FormerVendor
iTrader: (2)
Join Date: Jan 2004
Location: Los Angeles
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
It may be that your shifter bracket bolts backed out. They tend to come loose and will cause many problems. They are the two bolts attached to the trans pan that hold the shifted cable bracket. You are not far from us if don't figure it out then we can take a look at it.
#4
TECH Addict
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
It may be that your shifter bracket bolts backed out. They tend to come loose and will cause many problems. They are the two bolts attached to the trans pan that hold the shifted cable bracket. You are not far from us if don't figure it out then we can take a look at it.
#7
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,240
Likes: 0
Received 81 Likes
on
72 Posts
Well you have got a long way to go.....so keep trying bc you are so sure all 10,000+ of my ******* posts have been useless. Shouldn't you be out beating your old lady or whatever?
Trending Topics
#9
TECH Addict
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
BTW, also forgot to mention. ... Seems easier to get into 'R'/Reverse going down from 'P'/Park than it is to go up from 'D'/Drive. ...Any thoughts?
#10
The bracket is broken, thats your problem going off the video.
I have one off my SS when I did the M6 swap at 32,000 miles.
I'll sell it for $15 shipped USPS if you want it.
I show you a picture of it if you're interested.
And if you pay with paypal before 4:00 eastern time I will ship it today.
I have one off my SS when I did the M6 swap at 32,000 miles.
I'll sell it for $15 shipped USPS if you want it.
I show you a picture of it if you're interested.
And if you pay with paypal before 4:00 eastern time I will ship it today.
#11
TECH Addict
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
The bracket is broken, thats your problem going off the video.
I have one off my SS when I did the M6 swap at 32,000 miles.
I'll sell it for $15 shipped USPS if you want it.
I show you a picture of it if you're interested.
And if you pay with paypal before 4:00 eastern time I will ship it today.
I have one off my SS when I did the M6 swap at 32,000 miles.
I'll sell it for $15 shipped USPS if you want it.
I show you a picture of it if you're interested.
And if you pay with paypal before 4:00 eastern time I will ship it today.
.. Is it a bitch to swap out?..
#12
I'll ship it out first thing tomorrow.
To change it out use a screwdriver to pry the end of the cable off the linkage.
Remove the two mounting bolts.
Remove this big staple from the cable.
Use some pliers to compress the two tabs and push the bracket off the cable.
To reinstall it just put the new bracket on, make sure the cable snaps in place, put the staple back in it, bolt it to the pan, snap the cable end on the linkage.
You should be done unless it needs to be adjusted, thats easy enough. Post here if you need help with that.
To change it out use a screwdriver to pry the end of the cable off the linkage.
Remove the two mounting bolts.
Remove this big staple from the cable.
Use some pliers to compress the two tabs and push the bracket off the cable.
To reinstall it just put the new bracket on, make sure the cable snaps in place, put the staple back in it, bolt it to the pan, snap the cable end on the linkage.
You should be done unless it needs to be adjusted, thats easy enough. Post here if you need help with that.
Last edited by Jays_SSZ28; 01-30-2018 at 08:00 PM.
#13
TECH Addict
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
Paypal Sent! ... Thanks. PM me when you receive payment. ...
Let's hope it fixes the issue. .. If not, it's ok. Nothing should be broken or snapped anyways! .. Peice of mind! Haha!
Let's hope it fixes the issue. .. If not, it's ok. Nothing should be broken or snapped anyways! .. Peice of mind! Haha!
#15
TECH Addict
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
Got the bracket on Monday. Will install soon and report back.
BTW, Jays_SSZ28 ships **** fast! ... Good guy to order from. I'll post a Trader Rating for ya in a sec. Thanks!
BTW, Jays_SSZ28 ships **** fast! ... Good guy to order from. I'll post a Trader Rating for ya in a sec. Thanks!