Reusing tranny cooler

Reply Subscribe

Thread Tools

Search this Thread

Mar 16, 2011 | 10:23 AM

z28_n_tx

Thread Starter

TECH Resident

iTrader: (7)

Joined: Sep 2005

Posts: 894

Likes: 1

From: TexaS

Reusing tranny cooler

I posted this before but can't find the thread... I installed a b& m cooler last summer the 72064 I think is the cooler number..I'm finally getting my tranny rebuilt and am wondering wether to reuse it or go with the 72074??

Mar 16, 2011 | 10:38 AM

Jeremy@RPMTransmissions

FormerVendor

iTrader: (12)

Joined: Sep 2010

Posts: 1,553

Likes: 1

From: Anderson Indiana

I tried to look up those part numbers without any luck. I would use whichever cooler is larger. Clean the hell out of the used one if it is bigger.

Mar 16, 2011 | 04:24 PM

z28_n_tx

Thread Starter

TECH Resident

iTrader: (7)

Joined: Sep 2005

Posts: 894

Likes: 1

From: TexaS

I thought I would remember the part # s of the top of my head... Guess not lol. Will it be ok to use the old one to drive the car up to the shop have the tranny rebuilt and install a 3600 converter, drive back to my house and install the new tranny cooler??

Mar 16, 2011 | 05:43 PM

Jeremy@RPMTransmissions

FormerVendor

iTrader: (12)

Joined: Sep 2010

Posts: 1,553

Likes: 1

From: Anderson Indiana

Just make sure they clean the cooler and lines out REALLY good befor they install the new trans and you drive it home. You don't want all the trash from the burnt up trans going right back into your brand new trans.

Mar 16, 2011 | 07:06 PM

98 StealthZ

On The Tree

Joined: Jan 2011

Posts: 176

Likes: 0

From: Indiana

X2 that, see if they have a good flusher they can hook it up too..

Reply Subscribe