Torque converter for 4L80E +800hp
Thread Starter
Teching In
Joined: Sep 2005
Posts: 12
Likes: 0
Torque converter for 4L80E +800hp Hi I am looking for a torque converter for my 4L80E that I am using in an LS2 engine. The flexplate I am using is the one from the 5.3 V8 engine. Need it to hold +800hp, any vendor welcome.
Sounds like a great setup for our multi disk. We have it in just about any stall you need. We can also make it with the LS bolt pattern so it will bolt up to your 5.3 flexplate. Although at your power level I would suggest upgrading to a SFI flexplate, cheap insurance.
Chris
Chris
Thread Starter
Teching In
Joined: Sep 2005
Posts: 12
Likes: 0
Sounds like a great setup for our multi disk. We have it in just about any stall you need. We can also make it with the LS bolt pattern so it will bolt up to your 5.3 flexplate. Although at your power level I would suggest upgrading to a SFI flexplate, cheap insurance.
Chris
Chris
Thanks
