Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Need Help! Converter wont lock

Thread Tools
 
Search this Thread
 
Old 08-27-2011 | 12:01 PM
  #1  
maxplusten's Avatar
Thread Starter
TECH Resident
iTrader: (4)
 
Joined: May 2007
Posts: 814
Likes: 3
From: Harpers Ferry WV
Default Need Help! Converter wont lock

Well I finnally got the car tuned thursday and it ran great all day after the tune. Last night i go to take the car out and as im headed into town the trans decides the slip out of overdrive. well it gets progressivly worse to the point where the car barely wants to move down the road without me ramping up up like crazy. Almost didnt get it home. As far as i can tell its because the converter wont lock up. Trans is a brand new 4l60e from monster with less just over 500 miles on it already, converter is a yank 3600 stall. Running 24x ls1 management on an lt1. Thoughts, Ideas? im lost and dont know where to start
Old 08-27-2011 | 06:43 PM
  #2  
Gilbert@Ace Racing's Avatar
FormerVendor
 
Joined: Oct 2006
Posts: 3,123
Likes: 3
From: D-F/W
Default

I would suggest calling the folks you bought the transmission from. It sounds like it's hurt. If it won't pull then the problem is not the converter locking up.

g




All times are GMT -5. The time now is 08:27 AM.