Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits

Sponsored by:

stall help

Reply Subscribe

Search this Thread

Old

Sep 26, 2011 | 09:10 AM

#1

Thread Starter

Teching In

Joined: Jul 2009

Posts: 36

Likes: 0

From: Memphis TN

Talking

stall help

i got a ms3 cam im thinking about going 4000 stall but will i be able to spray and im going 243 cnc ported heads do anybody have a ms3 cam and 4000 stall and spraying

Old

Sep 26, 2011 | 03:29 PM

#2

TECH Senior Member

iTrader: (96)

Joined: Aug 2007

Posts: 24,241

Likes: 89

From: Turnin' Wrenches Infractions: 005

Default

Yank SS3600

Old

Sep 26, 2011 | 03:50 PM

#3

TECH Senior Member

iTrader: (71)

Joined: Jul 2007

Posts: 11,088

Likes: 2

From: Winchester, TN

Default

Buddy of mine had the ms4 with a vigilante 4000. It blew through it a little... He ran 7.6s cam only full weight and on a 200 hit ran 6.7s IIRC.. Been a few years now.

I would recommend getting a converter for your setup... If not and you are going to buy an off the shelf, stick with a 3600.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 02:21 PM.