Circle D 4C or 5C?
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Mar 2004
Posts: 6,163
Likes: 3
From: Classified
Circle D 4C or 5C? Looking into swapping out my 3200 stall for a circle D converter. Cant seem to make up my mind on these stalls. The car is just gonna be a H/C daily driver, fun street car. I also have 3.73 in the rear. Just wanting to hear from other members who are running them? How you like the performance? Do you wish you went bigger or smaller? Thanks
With 420rwhp and 536rwtq on a 150shot bolton car. My 4C took me to a 7.12@95.79mph 60' 1.53. Also on 3.42 gears...
Depends on ur cam size also for which one you'll need. There's also a link for asking him what you need.
He's been really good with me, and I'm sure he'll be the same with you also. Glad I could help.
Depends on ur cam size also for which one you'll need. There's also a link for asking him what you need.
He's been really good with me, and I'm sure he'll be the same with you also. Glad I could help.
11 Second Club
Joined: Oct 2005
Posts: 1,847
Likes: 1
From: Sandwich, IL
Depends on your cam specs. If you have a bigger cam (like I do) then the 5C works great. I love it even on the street. But if you have a smaller to mid size cam then I would go with the 4C. Either way I doubt you'll be unhappy.
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Mar 2004
Posts: 6,163
Likes: 3
From: Classified
Thanks guys.. Glad to hear you are happy with it. I have a 230 duration cam. So maybe the 4c would be perfect. But i just dont wanna regret not getting the 5c.
If you have a 230 duration cam, 3.73 gears, DD street car I think the 4C will be good. The 5C is not out of the question, but if it is not much of a track car I think it would be overkill.
Chris
Chris
I have Chris's 4C (I have this going against a little more TQ and HP than the average LS1), so the flash stall is going to be more like a average built LS1 with a 200 shot. Just about ready to drive this after the 4l80E swap. Can't wait to see how this Multidisc does vs. old Yanks, PI's and PTC I've owned over the years. Judging by the vids it looks like drive ability will be similar to my Yank 3600 Thruster Pro. By the way Chris, that verter is a work of art.... Almost did not want to put it in...
It will interesting to hit that verter with a 200 over the 725 engine hp. Hopefully, it won't blow threw the shift points. I'll be locking it above 6K rpm anyways to help that out. High 8's will be in my grasp (low 9's for sure). Got to at least see the tail lights of our LT1 based monster that has 14.5 to 1, big mechanical roller, 18 degree heads, 2900 race weight, and a Hogan’s tunnel ram with a 500hp multi stage plumbed in.
It will interesting to hit that verter with a 200 over the 725 engine hp. Hopefully, it won't blow threw the shift points. I'll be locking it above 6K rpm anyways to help that out. High 8's will be in my grasp (low 9's for sure). Got to at least see the tail lights of our LT1 based monster that has 14.5 to 1, big mechanical roller, 18 degree heads, 2900 race weight, and a Hogan’s tunnel ram with a 500hp multi stage plumbed in. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
..I was in your same boat and whent with the 5c..The thing just pulls! 