Which TH400? (Yank, Rossler, Coan, etc...)
#24
Originally Posted by turbo
How much HP is Rossler's 4L60E capable of?? Sounds interesting..
Casey
Casey
The also refresh the transmisions for a very low price.
http://www.rosslertrans.com/
#25
8s? Man, where have I been? I would love to keep my 4L60E for my future setup but I knew I wouldnt. I dont mind going to a TH400 and rossler was who I was going to go with. I want to hear more about this 4L60E lol
Casey
Casey
#26
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Nov 2001
Posts: 681
Likes: 0
From: Hockeytown/MotorCity
I talked to Carl @ Rossler....He recommended a level 2 Th400 for me for $2595
Then to have speed sensors:$200
Sleeved Drum for street:$225
Pan:$75
Second gear enging braking:$200
Transbrake:$200
Reverse manual valvebody?
Upgraded Bellhousing:$200?
$3700 !!!!!!!!! w/out converter?? so with a converter and other stuff needed for install:
$4700 for a trans!!!!!!!!!!!!! If you wanted another option "2.10 first gear add another 1600.......Over $6200 !
I dont know what to do anymore
Then to have speed sensors:$200
Sleeved Drum for street:$225
Pan:$75
Second gear enging braking:$200
Transbrake:$200
Reverse manual valvebody?
Upgraded Bellhousing:$200?
$3700 !!!!!!!!! w/out converter?? so with a converter and other stuff needed for install:
$4700 for a trans!!!!!!!!!!!!! If you wanted another option "2.10 first gear add another 1600.......Over $6200 !
I dont know what to do anymore
Last edited by andy98Z; 03-31-2004 at 11:39 AM.
#27
Andy, been there done that. Now, you have a lot of stuff in there that you can consider cutting back on. For instance, do you need a level 2 tranny with all the stuff? Or, can you get by with a lower level transmission. The problem is that you look at blowing up a tranny or two if you are going to make more power then you anticipate. You can either pay once or pay continually.