Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits

Sponsored by:

Need help

Reply Subscribe

Search this Thread

Old

Dec 22, 2011 | 10:25 AM

#1

Thread Starter

Teching In

iTrader: (1)

Joined: Oct 2007

Posts: 24

Likes: 0

Default

Need help

Will 4l60 and converter from 94 lt1 . Work on my 2005 5.3 . I'm puting it in my 88 monte Carlo thanks

Old

Dec 22, 2011 | 10:40 AM

#2

LS1Tech Sponsor

iTrader: (25)

Joined: Aug 2006

Posts: 10,854

Likes: 80

From: BLOOMSBURG PA

Default

You can do it you will need the collar bushing like is use with the 350 and 400 swap that goes in back of crank and you will have to enlongate bolt hole in flexplate and change out the wiring harness to allow use of the later 3-2 solenoid. You best bet is to get the correct trans for the engine combo

__________________

Built..PerformaBuilt..Tough

Call 888-744-6542

Old

Dec 22, 2011 | 01:52 PM

#3

Thread Starter

Teching In

iTrader: (1)

Joined: Oct 2007

Posts: 24

Likes: 0

Default

Quote:

Originally Posted by performabuilt

You can do it you will need the collar bushing like is use with the 350 and 400 swap that goes in back of crank and you will have to enlongate bolt hole in flexplate and change out the wiring harness to allow use of the later 3-2 solenoid. You best bet is to get the correct trans for the engine combo

I know for 125 u can buy flex plate and bushing and bolt to bolt the th350.i have a good 4 l 60 and converter that's why I was asking. thanks Alot

Old

Dec 22, 2011 | 01:54 PM

#4

Thread Starter

Teching In

iTrader: (1)

Joined: Oct 2007

Posts: 24

Likes: 0

Default

I have a guy that can wire up the tranny . I just want to know what I have to buy to make this work

Old

Dec 22, 2011 | 02:25 PM

#5

LS1Tech Sponsor

iTrader: (25)

Joined: Aug 2006

Posts: 10,854

Likes: 80

From: BLOOMSBURG PA

Default

As far as bolting up you just need the samepeices you just mentioned to bolt up a 350 or 400

__________________

Built..PerformaBuilt..Tough

Call 888-744-6542

Old

Dec 22, 2011 | 08:55 PM

#6

Thread Starter

Teching In

iTrader: (1)

Joined: Oct 2007

Posts: 24

Likes: 0

Default

thanks for your help

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 12:41 AM.