Replacing a 4l60e with a 4l80e random questions
05-18-2012, 05:47 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Wyoming
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Replacing a 4l60e with a 4l80e random questions Did you use the crossmember transmission bushing off the 80 or 60? And have any of you guys used the stock 4l60e linkage?
05-20-2012, 09:00 AM
#3
Have you read this thread?
https://ls1tech.com/forums/automatic...l80e-swap.html
All the trans mounts for late model GM transmissions are the same (with some exceptions). I think I got one from a mid '90's van for my swap.
stock linkage works after opening the mounting holes a bit.
All that info is pretty much covered in the above thread
https://ls1tech.com/forums/automatic...l80e-swap.html
All the trans mounts for late model GM transmissions are the same (with some exceptions). I think I got one from a mid '90's van for my swap.
stock linkage works after opening the mounting holes a bit.
All that info is pretty much covered in the above thread
