foreign object in 4l60e please help

Reply Subscribe

Thread Tools

Search this Thread

Aug 3, 2012 | 02:20 PM

bohr898

Thread Starter

Restricted User

iTrader: (6)

Joined: Feb 2008

Posts: 113

Likes: 0

From: Florida jax/st aug

foreign object in 4l60e please help

i took apart my 4l60e last night due to not having second gear.. once i got to the sun shell it had this piece wedged between the sun shell and the case

heres the pix http://jacksonville.craigslist.org/pts/3181834875.html

it looks all bent up and possibly used to be perfectly straight and would be about 4 inches long and both ends are flattened about a half inch

and ideas... was rebuilt in 2010 by some no name shop back when a friend owned the car

any help is appreciated!!!

Aug 3, 2012 | 03:06 PM

GMRACER13

TECH Apprentice

iTrader: (1)

Joined: Jul 2006

Posts: 311

Likes: 0

From: Tampa, FL

It's not a "foreign object", it's the anti-rattle clip/spring. It belongs between the case and the low roller sprag.

Last edited by GMRACER13; Aug 3, 2012 at 03:13 PM.

Aug 3, 2012 | 03:06 PM

WRT

Teching In

Joined: May 2012

Posts: 19

Likes: 0

From: Nevada, Texas

That is the anti clunk spring. It wedges between the low roller housing and the case. It keeps the low roller housing from walking back and forth in the case.

Aug 3, 2012 | 03:39 PM

bohr898

Thread Starter

Restricted User

iTrader: (6)

Joined: Feb 2008

Posts: 113

Likes: 0

From: Florida jax/st aug

thx

oh damn.. ive only built 4l80s and have never seen anything like that and where it was located i figured it came form somewhere else and got wedged and bent

thanks for the quick response guys

Reply Subscribe