No second gear?
Thread Starter
12 Second Club
Joined: Jan 2004
Posts: 527
Likes: 0
From: Chicago, IL
No second gear? I just got a transgo kit and installed it, and now I don't have second gear. It just spins up in first then shifts straight to third. I have talked to the Transgo tech guy and he walked me through all of the things that could have been wrong. I took it all back apart, checked it all, and put it back together, and I stil don't have second. I am gonna end up taking it to somewhere tomorrow and find out what code the SES light is spitting out. I hope it is an electrical code that would narrow it down to something I haven't checked.
Have any of you guys had this problem? What was it?
Have any of you guys had this problem? What was it?
TECH Veteran
Joined: Mar 2003
Posts: 4,492
Likes: 0
You almost certainly have something wrong with the intermediate apply servo on the passanger side of the case. It's probably either installed backwards, an o-ring missing, or a seal on incorrectly.
Or the 1-2 accumulator piston could be cracked...but that'd just allow for slippage on the 1-2 shift not missing 2nd all together.
You have 4th (OD)?
Or the 1-2 accumulator piston could be cracked...but that'd just allow for slippage on the 1-2 shift not missing 2nd all together.
You have 4th (OD)?
Thread Starter
12 Second Club
Joined: Jan 2004
Posts: 527
Likes: 0
From: Chicago, IL
Originally Posted by Hit Man X
You almost certainly have something wrong with the intermediate apply servo on the passanger side of the case. It's probably either installed backwards, an o-ring missing, or a seal on incorrectly.
Or the 1-2 accumulator piston could be cracked...but that'd just allow for slippage on the 1-2 shift not missing 2nd all together.
You have 4th (OD)?
Or the 1-2 accumulator piston could be cracked...but that'd just allow for slippage on the 1-2 shift not missing 2nd all together.
You have 4th (OD)?
