JeRM82

So I have been all over the place looking for this adapter fitting for my trans cooler set-up....this adapter is the SHAPE that I need but isn't the right size.....

Does anyone know of or can anyone find a part number for a fitting that is the sizes I labeled in the picture? I'm wondering if this is an odd size that I should just convert to all AN fittings if I can't find it......what a pain in the A$$.....2 fittings and I can fire this thing....HA HA!

therabidweasel

iTrader: (5)

Pretty sure, but not positive the us what you need:

http://m.summitracing.com/parts/bci-72001

mbaker3

On my F-body (2002 camaro) the tranny cooling lines are 5/16 inverted flare fittings. The fitting that actually screws into the tranny cooling side of the radiator is a 5/8-18 inverted flare fitting. I just converted my lines to 6-AN braided lines and it fit.

FirstYrLS1Z

iTrader: (4)

On my 98Z,the metal part of the transmission fluid cooler lines are 5/16" OD steel tubing. The fittimgs going into the radiator are 5/16 inverted flare that have a 1/2-20 thread connection into the radiator.