4l80e swap questions

Reply Subscribe

Thread Tools

Search this Thread

Mar 9, 2013 | 10:50 AM

Tc Hampton

Thread Starter

Teching In

Joined: Dec 2012

Posts: 29

Likes: 0

From: Duncan OK

4l80e swap questions

I have a 5.3 I'm putting a 4l80e behind and I have the factory harness I was wondering what wires I'm gonna need to move the pins in and explain how to wire the second vss and I'm just not 100% sure how to do it and were can I getting the connectors for the 4l80e

Mar 9, 2013 | 11:15 AM

Burken01

TECH Addict

iTrader: (88)

Joined: Mar 2005

Posts: 2,925

Likes: 14

From: Anaheim, Ca

Pm slow67 the godfather of 4l80 wiring!!

Do you have a A4 pcm with your harness?

Mar 9, 2013 | 02:39 PM

Tc Hampton

Thread Starter

Teching In

Joined: Dec 2012

Posts: 29

Likes: 0

From: Duncan OK

idk what the A4 is I got the factory stuff the pcm was blue and green it has dbw but ill be going to dbc but im sure that done mean anyting

Mar 10, 2013 | 07:26 PM

98cobrakiller

12 Second Club

Joined: Oct 2011

Posts: 217

Likes: 0

From: Seaford,DE

smh a4 means A=automatic 4= 4 speed

Mar 10, 2013 | 07:34 PM

Burken01

TECH Addict

iTrader: (88)

Joined: Mar 2005

Posts: 2,925

Likes: 14

From: Anaheim, Ca

yes automatic 4 speed, if your 5.3 and harness was originally a factory A4 then the swap will be easier, if your PCM has the manual t56 tune on it, it will have to be reflashed for an auto tune then you can re pin the harness to run the 4l80..