Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Trans & gears?

Old Mar 29, 2014 | 02:05 AM
  #1  
62nalide's Avatar
Thread Starter
TECH Addict
iTrader: (2)
 
Joined: Sep 2010
Posts: 2,192
Likes: 34
From: Dallas TX
Default Trans & gears?

Sup guys, I am helping a good friend of mine get his 2000 LS1 SS running good. It is 100% stock A4 3.23 gears. We just ordered some 1 7/8s, true duals, Lid, and a pulley for it. And I know our weak link is the 4L60E. Since we have a 3.23 gear my question is if I put a 275/50/15 tire (26") will that give me any type of gear back? It runs a 295/35/19 (27").

Sorry if I'm typing too much info lol The car is a weekend hot rod we wanna start with bolt-ons 1st but also gears and converter. What gear would be a good gear for a highway driveable car? We have our mind set on a circle-D 4000 triple disk but we are not 100% sure what transmission to run? A built 4L60/65/70E or do a 4L80E. Main goal is to make 650rwhp with nitrous down the road and maybe 400-450rwhp N/A.

Any tips/ideas please share them with me. Thanks in advance.
Reply
Old Mar 31, 2014 | 03:17 PM
  #2  
mjs1012's Avatar
TECH Addict
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (36)
 
Joined: Mar 2011
Posts: 2,688
Likes: 19
From: Stratford, CT
Default

The 26" tire is the stock height so I would go with that. My car has a 3600 stall and 3.73s and highway driving isn't too bad to, but the rpm increase is noticeable from when I had 3.23s. Id call one of the big transmission sponsors and see what they say about which transmission would be best to run.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:09 AM.