Dustya383

I'm installing a sk4l60e kit in my trans and I'm at a halt for a couple of reasons. The biggest being, that the instructions say to jot down the numbers on the 2nd piston in order to match the accumulator to the ecm,piston size,and accumulator code. I bought the tranny from a buddy who thought it was a 4l60e and come to find out, its a 2005 4l65e (woohoo for me!), all good and well, except for the fact that he installed a corvette servo and 2nd piston. The numbers on the piston are not listed on the transgo kit. So what spring would you guys use? They are listed in oz's. 24,56,72,80,and 88oz. It's a stock trans other than this kit,a vette servo,sonnax pinless accumulator and a circle d converter. I don't know if it matters but the motor is a 2001 5.3l,ls6 intake/injectors,torquer v2 cam,milled 241 heads, blah blah blah.I don't have a computer for the motor/tranny yet, its going into a 97 Dodge dakota and I haven't got as far as wiring/pcm yet. Thanks in advance!