Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Shifting from Park to Drive Issues on 4L60E

Thread Tools
 
Search this Thread
 
Old Feb 22, 2017 | 06:39 AM
  #1  
1998SSSLP's Avatar
Thread Starter
Teching In
iTrader: (2)
 
Joined: Jun 2015
Posts: 22
Likes: 0
Default Shifting from Park to Drive Issues on 4L60E

Weird problem.


Sometimes when I shift from Park to Drive, the transmission seems to slowly engage into drive which cause the idle to go up and then goes into gear, almost stalling the engine. I have a 2600 stall converter and the car runs like a bat out-a-hell, but this problem arises sometimes....not always. Now if I go from Reverse to drive and vise-versa...nothing happens - all is good - the trans goes right into gear with no issues.
Anyone have any ideas or cures???
Thanks.
Reply
Old Feb 23, 2017 | 10:32 PM
  #2  
mrvedit's Avatar
Moderator
15 Year Member
Photogenic
Photoriffic
Community Favorite
 
Joined: Aug 2010
Posts: 7,320
Likes: 527
From: Ann Arbor, MI
Default

I suggest connect a trans pressure gauge and documenting the pressure reading in Park, Reverse and Drive. Sounds like the pressure is very low.
Also confirm that the fluid level is topped off and the filter isn't ancient and perhaps clogged.
Reply




All times are GMT -5. The time now is 03:07 AM.