4l60e servo valve delete
Thread Starter
Teching In
Joined: Apr 2017
Posts: 2
Likes: 0
4l60e servo valve delete hi
i`ve seen some builders who thakes out the original one-way valve, and install a plug instaed.
is that correct?
and should i install the plug before the 3-4 oil gets into the 2nd accumulator, or install it underneath?
thanks
i`ve seen some builders who thakes out the original one-way valve, and install a plug instaed.
is that correct?
and should i install the plug before the 3-4 oil gets into the 2nd accumulator, or install it underneath?
thanks
TECH Fanatic
Joined: Jan 2015
Posts: 1,114
Likes: 33
From: Fort Worth, Texas
I personally never do this, But it seems to work.
Install the plug 'til it bottoms in the case. It can cause a soft 3rd apply on the first 2-3 shift of the day.
If you block the 3rd accumulator.....The band will not release on the 2-3 shift!
Why are you interested in doing this? If you have some leakage at the capsule....Take a flat nosed punch & re-seat the checkball with a few light taps.
Install the plug 'til it bottoms in the case. It can cause a soft 3rd apply on the first 2-3 shift of the day.
If you block the 3rd accumulator.....The band will not release on the 2-3 shift!
Why are you interested in doing this? If you have some leakage at the capsule....Take a flat nosed punch & re-seat the checkball with a few light taps.
I also do not suggest doing this mod for the reasons listed above.
__________________
