4l60e HP/Torque Limits?
Thread Starter
Staging Lane
Joined: Dec 2016
Posts: 98
Likes: 0
From: Minnesota
TECH Junkie
Joined: Nov 2013
Posts: 3,913
Likes: 366
From: White Bear, Mn
Rpms are another thing also. My H/C car was doing just fine until I started spinning it to 7000 rpms which seriously pissed it off lol. Mine was not a stock unit either.
Before mine let go I got to get in about 10 passes at the end of this past season. All passes were 1.5x 60's at almost full weight. (No ac, no spare tire)
Before mine let go I got to get in about 10 passes at the end of this past season. All passes were 1.5x 60's at almost full weight. (No ac, no spare tire)
TECH Fanatic
Joined: Dec 2017
Posts: 1,476
Likes: 271
From: Bossier City, Louisiana
Rick
Thread Starter
Staging Lane
Joined: Dec 2016
Posts: 98
Likes: 0
From: Minnesota
so my motor is gonna be around that 400 ft/lbs range of torque. is me flooring the car going 30-60 mph gonna kill my tranny right away.?
TECH Fanatic
Joined: Dec 2017
Posts: 1,476
Likes: 271
From: Bossier City, Louisiana
I'm guessing no harm done. The ATSG repair book for the 4L60E shows several durability / reliability GM upgrades after your stock 1995 4L60E was produced that you might consider for your trans. Like any piece of machinery, you can eventually wear anything out if it is overly abused too many times.
Rick
Rick
