Shift point question
Thread Starter
11 Second Club
Joined: Apr 2002
Posts: 526
Likes: 0
From: Waldorf, MD
Shift point question I posted a question in another thread but I don't think it's getting looked at. My question is: what should my shift points/rev limiter be set at with full bolt-ons, TCI 3800 stall, and 3.73 gears?
After a lot of searching I saw Ragtop and the Colonel recommend 6200 with a stock cam and headers, setting the rev limiter at 6400. I just wanted to double-check this, and to see if it's still accurate if I have a big stall with 3.73s.
Thanks guys!!!
After a lot of searching I saw Ragtop and the Colonel recommend 6200 with a stock cam and headers, setting the rev limiter at 6400. I just wanted to double-check this, and to see if it's still accurate if I have a big stall with 3.73s.
Thanks guys!!!
I have mine set at 6200, 6400 rev limiter also. I wouldn't go much higher than that with stock springs. I have 4200 stall w/3.73's
What kind of times are you running right now? Beating up on AXE yet?
What kind of times are you running right now? Beating up on AXE yet?
Thread Starter
11 Second Club
Joined: Apr 2002
Posts: 526
Likes: 0
From: Waldorf, MD
Haven't had it to the track yet. I'm waiting to get my F.A.S.T. intake and ported TB on first, so I can get some tuning done. Hopefully I'll give Axe some competition he can't handle 
Just have to borrow some tires first.
Just have to borrow some tires first. 
