rebuild price for 4l60e
rebuild price for 4l60e my 4l60e has began to slip in 3rd gear, which is understand is pretty common. about how much will it be to rebuild it with stock componets, i only have boltons and it will probably stay that way.
Launching!
Joined: Jun 2004
Posts: 269
Likes: 0
From: Mooresville, NC
It varies. I have seen people get quoted $500-$1500 for "stock" rebuilds. Leaving it stock leaves the door open for a similar failure. You should shop around and find somebody familiar with these transmissions. Somebody who can fix the problems and not just throw parts at it.
well the shop that has done all my work says they can rebuild stock for $800, put upgraded 3rd clutch packs and other odds and ends for $1000 and for $1500 put a converter in it. i know they do good transmissions bec he has built 4l60e trans that take 650 hp and show no wear. i was just wondering if this is a good price?
Holy **** you guys are getting ripped off.... or you dont know anyone........ Ive about had it with mine so this is the last rebuild for me..... but i use the TCI rebuild kit with all new clutches with an extra clutch per gear, new bands, and straight steels.... for under $200 shipped to my door.... then a local guy i know who knows his **** in trannys does the work for me for $250.... My buddy that just moved to Houston used to do the work for me for $200...... i have to pull the tranny and bring it to both of them though.... but the tranny only takes me about 30 min. to pull... and thats on jack stands...... search around and ask your friends if they know anyone..... thats just my .02 though.
Kyle
Kyle
Originally Posted by NA$TY-TA
Holy **** you guys are getting ripped off.... or you dont know anyone........ Ive about had it with mine so this is the last rebuild for me..... but i use the TCI rebuild kit with all new clutches with an extra clutch per gear, new bands, and straight steels.... for under $200 shipped to my door.... then a local guy i know who knows his **** in trannys does the work for me for $250.... My buddy that just moved to Houston used to do the work for me for $200...... i have to pull the tranny and bring it to both of them though.... but the tranny only takes me about 30 min. to pull... and thats on jack stands...... search around and ask your friends if they know anyone..... thats just my .02 though.
Kyle
Kyle
Im with Nasty TA i have a friend who works at a tranny shop and only charges 200 for labor on the side of course and he can order the rebuild kit thru the shop and save big bucks. But if u went throught the shop it would cost 1400.
Trending Topics
the place i go to is Advance Racing Dynaics (ARD) beltway 8 and hamerly. but if someone could give the the number of someone who could do the work if i pulled the tranny that would be great. anyone?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Senior Member
Joined: Apr 2004
Posts: 6,157
Likes: 1
From: Texas
Originally Posted by GT Griller
Im with Nasty TA i have a friend who works at a tranny shop and only charges 200 for labor on the side of course and he can order the rebuild kit thru the shop and save big bucks. But if u went throught the shop it would cost 1400.
Anyone know someone in the dallas area?
Teching In
Joined: Oct 2003
Posts: 5
Likes: 0
