Th400 help.
I got mine from Goebel. He makes a bitching unit. I just recently did the same swap too. Your going to love every bit of it. Feel free to ask for any parts that is needed or for anything else.
Again Goebel.....I don't have a website but your going to need....B&M Pro Ratchet Shifter -$165.00 , Driveshaft- $depends on what you want, Crossmember- BMR$169.95, Torque convertor-$again depends on what you want, B&M Trans Cooler-like $50 for a nice one, Torque Arm that doesn't connect to your tranny-I bought a Global West Trak link used for $250, Flexplate-Like $100 from GM. I think that is about it. Some examples of some Goebel users are Elite_Hot_Rod(which just recently switched to powerglide), GuessWho. Both are 9 sec. cars.
Staging Lane
Joined: Nov 2001
Posts: 74
Likes: 0
From: Denton/Lewisville, Tx.
I would not recommend Goebel. Two local cars, one with a Goebal TH400 and another with a Goebal PG(Guess Who?) both took a ****. Guess Who?'s car broke during his burn out the first time out with his new setup.
Thread Starter
TECH Fanatic
Joined: Apr 2002
Posts: 1,560
Likes: 0
From: kuwait
Originally Posted by Silver BeaSSt
I would not recommend Goebel. Two local cars, one with a Goebal TH400 and another with a Goebal PG(Guess Who?) both took a ****. Guess Who?'s car broke during his burn out the first time out with his new setup.
So what is you advice ?
Trending Topics
Teching In
Joined: Oct 2004
Posts: 36
Likes: 0
From: Wisconsin
Originally Posted by oOoLy
From where can i get the Rossler ? any sponsor ?
http://www.rosslertrans.com
Call and talk to Carl.
Also
http://www.coanracing.com/
Coan and Roassler make some top notch stuff!!
Originally Posted by Silver BeaSSt
I would not recommend Goebel. Two local cars, one with a Goebal TH400 and another with a Goebal PG(Guess Who?) both took a ****. Guess Who?'s car broke during his burn out the first time out with his new setup.
So how is that Goebel's fault? Not trying to be an ******* just trying to understand.
Ike
Last edited by 99'Formula; Mar 10, 2005 at 09:02 AM.
90% of how a transmission performs is all based on whats inside of it. No matter if Goebel built it or Rossler. You don't put nice guts in it, then its going to **** out on you no matter who built it.
Staging Lane
Joined: Nov 2001
Posts: 74
Likes: 0
From: Denton/Lewisville, Tx.
Originally Posted by 99'Formula
Both took a ****????????? The only one that took a **** was GuessWho's Powerglide. Reason was is because his servo broke. The reason it broke is because CJ opted to not have nice products in his unit and if it did break another time then I don't know of it but I would probably its because of the non expensive parts. With you saying Marks also took a ****. I don't understand because it never did and now it is in my car. So how is that Goebel's fault?
Not trying to be an ******* just trying to understand.
Ike
So how is that Goebel's fault? Not trying to be an ******* just trying to understand.
Ike
The TH400 that took a **** wasn't Mark's, it is a guy with a white TA. As far as CJ spending as little as possible on a glide, whay does that not surprise me?
Originally Posted by Silver BeaSSt
The TH400 that took a **** wasn't Mark's, it is a guy with a white TA.
Originally Posted by Silver BeaSSt
As far as CJ spending as little as possible on a glide, whay does that not surprise me?