problems with converter.

Reply Subscribe

Thread Tools

Search this Thread

Apr 3, 2005 | 02:26 PM

redhotz28

Thread Starter

11 Second Club

iTrader: (3)

Joined: Feb 2005

Posts: 127

Likes: 0

From: Idaho

problems with converter.

hey guys, just finished installing a tci sf3000 converter. was wondering if any of you guys have experienced this problem: at idle rpms start jump, when coming to a stop car shuts off. seems almost as if there is a vaccum leak or something. when tranny was out i seen a vacumm-t two side were connected but one side was open, did i miss a hose or do you guys know whats going on. please any help would be appreciated.

Apr 3, 2005 | 02:46 PM

strokedls1

TECH Fanatic

iTrader: (1)

Joined: Nov 2002

Posts: 1,829

Likes: 0

From: Venice, Ca

There is a vacuum line coming out the back of the intake. It goes off to the drivers side where it T's off. Check to make sure all lines are connected.

Apr 3, 2005 | 03:32 PM

SmokingWS6

TECH Fanatic

iTrader: (1)

Joined: Jun 2004

Posts: 1,795

Likes: 2

From: St. Louis MO

Might need to do the idle relearn procedure.
I believe its

Disconnect battery
Turn ingntion on/off
Reconnect
start car
2 mins idle in park
2 mins idle in drive
2 mins idle in reverse

Apr 3, 2005 | 09:20 PM

redhotz28

Thread Starter

11 Second Club

iTrader: (3)

Joined: Feb 2005

Posts: 127

Likes: 0

From: Idaho

Quote:

Originally Posted by strokedls1

There is a vacuum line coming out the back of the intake. It goes off to the drivers side where it T's off. Check to make sure all lines are connected.

on the t fitting there was a hose that was conncected , so are all 3 sides of the connector hooked to a hose?

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last