What torque converter??
Thread Starter
11 Second Club
iTrader: (33)
Joined: Aug 2004
Posts: 819
Likes: 1
From: Gloucester, VA
What torque converter?? Just wondering what TC's you guys use in a stock 4L60-E trans. I have successfully cut 1.54-1.55 60 ft times with my Yank PT4000. Just wanted to see if everyone else is having good 60fts with Yank or if anyones having better times with another brand. Thanks for any responses...Sam
Oh BTW my car is bolt on only, with a stock 4L60-E..
Oh BTW my car is bolt on only, with a stock 4L60-E..
11 Second Club
Joined: Oct 2004
Posts: 418
Likes: 0
From: Pembroke Pines,FL
The best to date 1.63 with a Vig3200 (DA 2000ish). I should be able to lower it when it cools down, but I dought I can get in the 1.5's without shinneys.
Your 1.5's are sweet
I used to live in Fredericksburg VA, I still miss MIR
Your 1.5's are sweet
I used to live in Fredericksburg VA, I still miss MIR
Thread Starter
11 Second Club
iTrader: (33)
Joined: Aug 2004
Posts: 819
Likes: 1
From: Gloucester, VA
Thanks man, I run at MIR all the time, just ran in the EFA shootout there on Sat and got first place for the SI class. Fredricksburg isnt too far from me. Maybe try a 3:73 gear, you'll probably hit the 1.5's than
Originally Posted by Slacker
1st place during the shootout! Good deal.. 3:73's would help, I just hate the idea to put money in this 10bolt then 
Plus Moroso doesn't beleave in VHT 
Plus Moroso doesn't beleave in VHT 
Here is his car launching:
You are always going to get Vig vs Yank guys, there are many threads out there on it. Any car that does a 1.5x SI is not too shabby. You have plenty to be proud of with that car. Do the posi and dyno tune it.
11 Second Club
Joined: Oct 2004
Posts: 418
Likes: 0
From: Pembroke Pines,FL
I agree 1.5x SI & pulling a wheel is definitly something to talk about. My goal is to get as close to 11.50 as possible (don't want a roll cage). Hopefully during winter I'll be in the 11.6's, Im always 2/10ths slower in the summer. Are you guys still using 10bolts?
Originally Posted by Slacker
I agree 1.5x SI & pulling a wheel is definitly something to talk about. My goal is to get as close to 11.50 as possible (don't want a roll cage). Hopefully during winter I'll be in the 11.6's, Im always 2/10ths slower in the summer. Are you guys still using 10bolts?
Trending Topics
Thread Starter
11 Second Club
iTrader: (33)
Joined: Aug 2004
Posts: 819
Likes: 1
From: Gloucester, VA
I love that pic of my car, ready to frame it, yup still on the stock ten bolt with 4:10 gears but may have a back up on the way.Thanks for the pic Ed.
Slacker i bet you will see the 11.6x range I know I would love to see that myself and goodluck.
Slacker i bet you will see the 11.6x range I know I would love to see that myself and goodluck.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
