Installed fuddle 3400 2.1 str
Thread Starter
12 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 481
Likes: 1
From: Lafayette, Louisiana
Installed fuddle 3400 2.1 str well just got my car back with the tranny rebuild and stall. I have to say the car woke up, but the convertor is really loose. I still have 2.73 gears will be changing them nexted week. Hopefully the convertor tightens up a good bit with the gear swap. but the car feels great my tires don't have a chance anymore. i ran 12.90s with the 2.73s and stock convertor so can't wait till i get the gears and tires.
TECH Enthusiast
Joined: Mar 2004
Posts: 647
Likes: 0
From: Australia
I have that same stall in my Monaro. 228-232 cam, headwork and 3.73 gears. Forget half throttle take-offs on the street. Forget full throttle at any point through 1st gear. This is a great all-round converter.
Gas mileage sucks *** in the city. But you get that. You pay to play.
At the track, I havent been able to hook it up yet. With Mickey Thompson ET Street Radials I just blow them away no matter what I do - stall, flash from idle etc.. So far I've run 11.7@119 1.67 60' turning tyre for 30m off the line.
I think you will be pleasantly surprised.
Gas mileage sucks *** in the city. But you get that. You pay to play.
At the track, I havent been able to hook it up yet. With Mickey Thompson ET Street Radials I just blow them away no matter what I do - stall, flash from idle etc.. So far I've run 11.7@119 1.67 60' turning tyre for 30m off the line.
I think you will be pleasantly surprised.
