Question regarding stall and gearing..
Thread Starter
Joined: Nov 2001
Posts: 7,303
Likes: 4
From: Delray Beach, Fl.
Question regarding stall and gearing.. Say u had a converter built for a setup thats running a 4.10/26in tire combo.
Then u go to a 4.56/28in combo.
Will this effect the flash,stall or shift extension of the verter?
JS
Then u go to a 4.56/28in combo.
Will this effect the flash,stall or shift extension of the verter?
JS
TECH Senior Member
Joined: Nov 2001
Posts: 10,341
Likes: 1
Re: Question regarding stall and gearing.. You will notice very little change at the track cause the overall final drive is very close.
However on the street if you are running a 26 inch tire you will notice the converter feel a little tighter around town
Cheers,
Chris
However on the street if you are running a 26 inch tire you will notice the converter feel a little tighter around town
Cheers,
Chris