th350-400 guys help inside!
th350-400 guys help inside! I'm installing a th350 with a 6" tailshaft here real soon and I have a few questions...
1.where and what flexplates will work for the sbc torque converters with out shimming?
2. how can I get the speedo to work but still allowing the use of abs? Can I have a tail shaft installed from a 4l60E to keep the torque arm mounting then use a reluctor ring from a 700r4?
1.where and what flexplates will work for the sbc torque converters with out shimming?
2. how can I get the speedo to work but still allowing the use of abs? Can I have a tail shaft installed from a 4l60E to keep the torque arm mounting then use a reluctor ring from a 700r4?
11 Second Club
iTrader: (27)
Joined: May 2005
Posts: 6,799
Likes: 5
From: Your girl's back door giving her the long stroke while you're at work
The TCI flexplate will work with a sbc converter because it has a dual bolt pattern. I've been told that there is a company that makes a conversion kit but they didn't know who it was. Trans shops used it when they would which from a 700R4 to a TH350.