Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Noise after 12 bolt install,need idea's

Thread Tools
 
Search this Thread
 
Old Jul 18, 2002 | 10:45 AM
  #1  
Slowhawk's Avatar
Thread Starter
LS1Tech Sponsor
iTrader: (12)
 
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Default Noise after 12 bolt install,need idea's

I installed a Strange 12 bolt 3 weeks ago.The noise is a banging sound over sharp bumps.I've retightened all suspension pieces twice and even clearenced my Catback as far away from the rear as I can.
Over a harsh bump it's so loud that it echo's off buildings.Anyone have this problem?I'm running out of idea's <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
Reply
Old Jul 18, 2002 | 05:26 PM
  #2  
MechMan's Avatar
10 Second Club
 
Joined: Nov 2001
Posts: 276
Likes: 0
From: So. Fl.
Default Re: Noise after 12 bolt install,need idea's

I had the same problem. every little bump and clunk clunk. I just tightened the **** outa my LCA's
and that fixed it.....
Reply
Old Jul 18, 2002 | 10:21 PM
  #3  
Slowhawk's Avatar
Thread Starter
LS1Tech Sponsor
iTrader: (12)
 
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Default Re: Noise after 12 bolt install,need idea's

Thanks guys,I'll check those area's <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Reply
Old Jul 19, 2002 | 12:14 AM
  #4  
MIGHTYMOUSE's Avatar
TECH Senior Member
20 Year Member
Photogenic
Photoriffic
Liked
iTrader: (59)
 
Joined: Nov 2001
Posts: 10,018
Likes: 51
From: Virginia
Default Re: Noise after 12 bolt install,need idea's

on my moser i had to shim my lca's to one side becaues they were clacking between the overly large lca brackets.. check that.
Reply
Old Jul 21, 2002 | 07:24 AM
  #5  
Slowhawk's Avatar
Thread Starter
LS1Tech Sponsor
iTrader: (12)
 
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Default Re: Noise after 12 bolt install,need idea's

It ended up being the brace above the panhard bar.The TA cover bolt was catching it a little bit.I just cut off 1/4" where it was hitting and now the noise is gone <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Reply




All times are GMT -5. The time now is 03:15 PM.