i have a Rossler stage III tranny in my V6

back in may the motor took a dump

about 3 weeks ago i got the new motor back in with the same trans

hooked it up and its throwing

it throwing:
0740 TCC enable
0753 1-2
0758 2-3
0785 3-2
1860 TCC something

i thought it wasn't pluged in all the way so i tried to plug it in more.... and i push the plug down into the tranny

Today i took the tranny pan off and push the plug back up in there and pluged the harness back in. refill with tranny fluid

AND I GET THE some thing... i even cleaned the connector for the harness

i also checked the connections at the PCM they look fine and the harness plug looks fine also....

i don't know what else to try/do i know nothing about auto's lol

the tranny will not throw the shift codes unless the car is moving and it don't shift..... you can feel that the tranny it not shifting at all.....

please help

 

Ill send you a pin out diagram shortly get yahoo messenger so its easy to file transfer everything you need

 

sweet can you email it? unless its over 10GB you should be able to emial it to me

 

yes yahoo is easier but ok can do

 

okay i'm on yahoo now

v6turbocamaro

 

thanks !!!!!!!!!!!!!

not out of the woods untill i go for a drive but

when i converted my car i had to run wire off the free IGN port in the fuse box... to a wire in the harness......

I FORGOT ABOUT IT i cut it getting the motor in cause it was in the way lol

thanks performabiult !!! << helpd me on saterday and i never bought anything off him

 

Did you get to test it yet ?

 

no its raining ***** and the new stall scares me.... i have no idea how the car is going to react in rain and the alignment is way off..... maybe tomorrow lol

 

Ok well let me know ,

 

runs great thats what it was

THANKS

you didn't have to help me at all, let alone on saturday