getting th400, manual valve body?
08-27-2002, 11:12 AM
#1
TECH Fanatic
Thread Starter
Join Date: Jan 2002
Location: pa
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
getting th400, manual valve body? I made my mind up to go with a th400 made by www.rosslertrans.com
should I get a manual valve body?
with a manual valve body do you have do downshift also?
or just get a built regular th400 and when at the track shift it myself?
should I get a manual valve body?
with a manual valve body do you have do downshift also?
or just get a built regular th400 and when at the track shift it myself?
08-27-2002, 11:55 AM
#2
Re: getting th400, manual valve body? Get the manual valve body. It's much more precise and fast than manual shifting an auto valve body. While you're at it, have them install a trans brake. <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
08-27-2002, 06:05 PM
#4
TECH Addict
Join Date: Nov 2001
Location: Nawf Carolina
Posts: 2,556
Likes: 0
Received 0 Likes
on
0 Posts
Re: getting th400, manual valve body? Hitting the button on the 'brake puts it in 1st and Reverse at the same time. Then you rev the motor to whereever you want to lanch from (or floor it, if you have a 2 step rev limiter). Then when you release the button its sorta like dumping the clutch....
Allows much higher launch rpm than footbraking.
J.
Allows much higher launch rpm than footbraking.
J.
09-03-2002, 05:37 PM
#5
TECH Fanatic
Thread Starter
Join Date: Jan 2002
Location: pa
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
Re: getting th400, manual valve body? well it's ordered!
rossler th400 WITH TRANS BRAKE AND MANUAL VALVE BODY!
I just ordered the yank speedometer set up too, mike at yank is a pleasure to talk to! He is VERY informative!
rossler th400 WITH TRANS BRAKE AND MANUAL VALVE BODY!
I just ordered the yank speedometer set up too, mike at yank is a pleasure to talk to! He is VERY informative!
400, 53, automatic, body, downshift, install, installation, installing, jeep, manual, modification, set, th400, transbrake, transmission, valve
