Claiming to be the Strongest Trans
Thread Starter
Banned
Joined: Jan 2007
Posts: 56
Likes: 0
Claiming to be the Strongest Trans With every tranny builder claiming the have the strongest trans who actually has a tranny that will hold close to 1500whp/1500wtq and claim it on an open forum. It can be a Glide or th400 doesn't matter.
Good question and in our case honestly since we just introduced our 400 and have not had a high hp dyno test on one yet or one in a car at that power level we cannot state that absolutly until one of those things happen. However based on the build they should but again its un tested at that level unlike our 4l60e and 700r4 which we have tested at the varoius power levels generally in cars on chasis dynos in the past and customers cars.
__________________
Rossler TH210 without a doubt. 2K hp cars are holding with them. be ready to pay but hey, if you are making 1500 hp, you have lots o budget. deadbear glides are tough to beat as well
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Well sounds like a new sponsor but needs to pay his dues like the rest of us
__________________
from what i've heard the strongest 3 spd is the TH210 by Rossler. Their unlimited HP warranty is a pretty bold.
I'm running a basic th400 from Rossler and Carl said that it will handle 900-1000 tq in most cars, but after that it's time for some better parts, etc.
I'm running a basic th400 from Rossler and Carl said that it will handle 900-1000 tq in most cars, but after that it's time for some better parts, etc.
