Torque Converter Rebuilder?
Does anybody in Houston or surrounding cities no where I can have a torque converter rebuilt/modified with very quick turnaround? I have an aftermarket converter for a C5 and I need it modified to fit an F-body. Temporary fix for Super Chevy. Yank soon!!!!
I would be very reluctant to have anybody local respline, realign, and resize an expensive torque converter. Sell your C5 converter for it's highest value and buy a used Yank or Vig. There are some for sale in Houston. What do you need?
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
703Crewchief,
We're not in the Houston area, but we typically have a two day turnaround on our converter rebuilds. Let me know if we can help you.
Kevin Winstead
TCI Automotive
662224-9355
We're not in the Houston area, but we typically have a two day turnaround on our converter rebuilds. Let me know if we can help you.
Kevin Winstead
TCI Automotive
662224-9355
Any Converter in the 3,000 to 4,000 range. This is just a crutch for a race. It will be temporary
a new Yank is in the plans. Looking to spend around $300
a new Yank is in the plans. Looking to spend around $300
You might want to check Mike at Century Automotive. He's awesome at doing work on our trannys but I'm not sure if he does torque converter work. Call him and find out, I found that everybody recommended him to me for tranny work.
Century Automotive
281-633-8155
811 Plantation Drive
Richmond, TX 77469
Century Automotive
281-633-8155
811 Plantation Drive
Richmond, TX 77469
I had Trans King do my 8" converter, they are in Galveston. Its been a while since I had it done but they did it while I was there waiting. I watched them do all the work. As far as quality/reliabilty etc. goes my car ran 9.60@138 and went 1.30 in the 60ft with a 1.76 glide and 4.30 gear #3280. No problems at all with the setup.




