4L60E shift problem
Thread Starter
Teching In
Joined: Dec 2006
Posts: 25
Likes: 0
From: Port Royal, SC ( Parris Island )
4L60E shift problem Here's a quick rundown:
Put in a 2800 stall and the 2-3 shift bounces off the rev limiter at WOT until I let up a little bit. I added more tranny fluid when I first noticed it, and now it only hangs for a little bit before it shifts, but I still have to let up on the gas just a tiny bit. Does it need more tranny fluid, do I need a new tune for the stall? Gurus please help.
Put in a 2800 stall and the 2-3 shift bounces off the rev limiter at WOT until I let up a little bit. I added more tranny fluid when I first noticed it, and now it only hangs for a little bit before it shifts, but I still have to let up on the gas just a tiny bit. Does it need more tranny fluid, do I need a new tune for the stall? Gurus please help.
Well if this just started with the stall I would suggest lowering the shift points for that shift you have to remember your adding more torque to the equation but the trans is acting the same , Same amount of time for the shift I think you are experincing what some people call a stall wall
__________________
I am not a tuner but by a couple hundred rpm and 5 to 10 MPH and work from there up till you get where you want
__________________
