Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

best gearing and converter

Thread Tools
 
Search this Thread
 
Old Nov 11, 2002 | 01:52 PM
  #1  
Patrick G's Avatar
Thread Starter
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default Re: best gearing and converter

4.10s will really get a heavy truck moving, but you'll need to chose your converter very carefully. If you do any towing at all, stick with the larger 278mm Truck Thrusters (like the TT3000). If your Silverado is just a hot rod, then get a Yank Super Stock 3600 and spray the hell out of it.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Reply
Old Nov 11, 2002 | 02:29 PM
  #2  
red53gmc's Avatar
TECH Resident
 
Joined: Dec 2001
Posts: 918
Likes: 0
From: Baton Rouge, LA
Default Re: best gearing and converter

How many times are you going to ask that same question?????

<img border="0" alt="[bullshit]" title="" src="graemlins/gr_bs.gif" />
Reply
Old Nov 11, 2002 | 05:42 PM
  #3  
Slowverado's Avatar
Banned
 
Joined: Sep 2002
Posts: 5,581
Likes: 0
From: Azle/Saginaw, Tx
Default Re: best gearing and converter

i do very minimal towing, and when i do it's only jet skis...would a 3200 rpm stall work well with the weight of two jet skis?
Reply
Old Nov 12, 2002 | 12:44 AM
  #4  
Slowverado's Avatar
Banned
 
Joined: Sep 2002
Posts: 5,581
Likes: 0
From: Azle/Saginaw, Tx
Default best gearing and converter

i'm thinking of going with the auburn posi with 4.10s, but don't know if that's the best, and i would also like some suggestions on what stall to use. it's in a new silverado with v-8, with headers and exhaust, and a few other small mods, and a 100 shot. thanks in advance.

<small>[ November 11, 2002, 12:45 PM: Message edited by: slowverado ]</small>
Reply




All times are GMT -5. The time now is 03:34 PM.