I will be converting my M6 to a TH400 right after Thanksgiving. My question is what do I do with the clutch pedal? Leave it there, or remove it? Is it hard to remove?

Also, do I need to get an automatic center console, or will the M6 center console work with a automatic shifter?

TIA! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

 

ttt

 

Just push the clutch peddle to the floor and tie it up (leave it there). As far as for the console, you can reuse your original console w/the 6-speed boot if you get the B&M Rachet Shifters (Hammer or Pro Ratchet). That's what I did.

 

Thank you very much Scott!

 

scott,do you have some picks of shifter.how it looks in car,im converting this weekend and the hammer shifter is what i bought.did the cable that came with it work fine?

 

ttt

 

Confuzed,

The cable that comes with the Hammer works fine, Here's a few pics of the Hammer in my car after the conversion. The pics suck because my scanner crapped out and they are pics of pics.

Will

<img src="http://64.45.232.21/shifter1.jpg" alt=" - " />

<img src="http://64.45.232.21/shifter2.jpg" alt=" - " />

<img src="http://64.45.232.21/shifter3.jpg" alt=" - " />

<img src="http://64.45.232.21/shifter4.jpg" alt=" - " />

 

This is the shifter I want to get. Will this work with the M6 console?

<img src="http://www.jegs.com/photos/13080798.jpg" alt=" - " />

<small>[ November 13, 2002, 10:03 AM: Message edited by: Big Mike ]</small>