Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

4L60e slips in OD and Drive?

Old Sep 16, 2007 | 11:23 PM
  #1  
Kiss_My_99SS's Avatar
Thread Starter
Launching!
iTrader: (8)
 
Joined: Apr 2005
Posts: 203
Likes: 0
From: TN
Default 4L60e slips in OD and Drive?

Just got done with the rebuild and it slips in OD and D on take off. What could be wrong?
Reply
Old Sep 16, 2007 | 11:24 PM
  #2  
performabuilt's Avatar
LS1Tech Sponsor
15 Year Member
Liked
Loved
Community Favorite
iTrader: (25)
 
Joined: Aug 2006
Posts: 10,854
Likes: 80
From: BLOOMSBURG PA
Default

Describe in detail what its doing and does it shift ?
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Reply
Old Sep 16, 2007 | 11:31 PM
  #3  
Kiss_My_99SS's Avatar
Thread Starter
Launching!
iTrader: (8)
 
Joined: Apr 2005
Posts: 203
Likes: 0
From: TN
Default

It shifts good in all gears. When i move the shifter from P to OD or D I can barely feel it go in gear real soft feeling and slips on take off. When i do the same but go to 2 or 1 nice and frim engauge no slip on take off.
Reply
Old Sep 16, 2007 | 11:33 PM
  #4  
performabuilt's Avatar
LS1Tech Sponsor
15 Year Member
Liked
Loved
Community Favorite
iTrader: (25)
 
Joined: Aug 2006
Posts: 10,854
Likes: 80
From: BLOOMSBURG PA
Default

Hmm Check that the small filters in the pump
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Reply
Old Sep 16, 2007 | 11:36 PM
  #5  
Kiss_My_99SS's Avatar
Thread Starter
Launching!
iTrader: (8)
 
Joined: Apr 2005
Posts: 203
Likes: 0
From: TN
Default

anything else it could be? the fliter was nice and tight on install.
Reply
Old Sep 16, 2007 | 11:57 PM
  #6  
performabuilt's Avatar
LS1Tech Sponsor
15 Year Member
Liked
Loved
Community Favorite
iTrader: (25)
 
Joined: Aug 2006
Posts: 10,854
Likes: 80
From: BLOOMSBURG PA
Default

Stuck PR or bad PCS did you replace it ?
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Reply
Old Sep 17, 2007 | 12:15 AM
  #7  
Kiss_My_99SS's Avatar
Thread Starter
Launching!
iTrader: (8)
 
Joined: Apr 2005
Posts: 203
Likes: 0
From: TN
Default

NO. What is PR?
Reply
Old Sep 17, 2007 | 09:03 AM
  #8  
performabuilt's Avatar
LS1Tech Sponsor
15 Year Member
Liked
Loved
Community Favorite
iTrader: (25)
 
Joined: Aug 2006
Posts: 10,854
Likes: 80
From: BLOOMSBURG PA
Default

Presure regulator valve in the pump
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:55 PM.