Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

help me pick better stal for my th350!!

Old Jun 28, 2003 | 12:25 AM
  #1  
TApimp's Avatar
Thread Starter
TECH Resident
iTrader: (1)
 
Joined: Dec 2001
Posts: 753
Likes: 0
From: TX
Default help me pick better stal for my th350!!

setup consits of 218/222 581/569 on 114 cam, mild ported heads, tnt nitrous kit should be at around 150 shot
9 inch with 3:70's car is easily around 3600 pounds

i have a ptc 3500 stall, but i can foot brake it all the way up to around 3400, so i think it may be a little to big for my app. can anyone help me out?
Reply
Old Jun 28, 2003 | 08:40 AM
  #2  
Ragtop 99's Avatar
TECH Senior Member
iTrader: (7)
 
Joined: Nov 2001
Posts: 9,491
Likes: 1
From: Bethesda, MD
Default Re: help me pick better stal for my th350!!

spray it and see where it goes. From there you can decide if it is too big.
Reply
Old Jun 28, 2003 | 08:50 AM
  #3  
Kevin Winstead's Avatar
FormerVendor
 
Joined: Feb 2002
Posts: 430
Likes: 0
From: Falkner, MS
Default Re: help me pick better stal for my th350!!

I'd send the PTC converter back and get it restalled. Kenny does a pretty good job on his converters. If you're footbraking 3400, then it's flashing alot higher. Do like Ragtop suggested and see where it flashes on N2O. I'd like to see a flash stall of no more than 4000 on motor and no more than 5000 on juice, preferably a couple hundred less than that...those TNT kits hit pretty hard.
Kevin
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:11 PM.