What stall for me?? H/C/Boltons
Thread Starter
TECH Fanatic
Joined: Sep 2002
Posts: 1,505
Likes: 0
From: -TeXaS-?
What stall for me?? H/C/Boltons MTI S2 Heads
X1 Cam
Moser 12 Bolt 373
ET Streets
Fully built tranny
I have the Vig 3000 But I only cut HIGH 1.70's I would like to hit HIGH 1.50's. Im about to restall it but wanted some opinions on what stall. I was thinking a 4000 stall?
X1 Cam
Moser 12 Bolt 373
ET Streets
Fully built tranny
I have the Vig 3000 But I only cut HIGH 1.70's I would like to hit HIGH 1.50's. Im about to restall it but wanted some opinions on what stall. I was thinking a 4000 stall?
TECH Senior Member
Joined: Nov 2001
Posts: 9,246
Likes: 3
From: Troy, AL
Re: What stall for me?? H/C/Boltons If all you want is high 1.5s, the TCI 3500 could get you there. I ran 1.61 with stock gears, NO weight reduction done to the car, and internally STOCK engine, on drag radials.
Re: What stall for me?? H/C/Boltons I was thinking the same thing Colonel. How well is the car biting the track. When you launch do you feel any slippage at the wheels or in the tranny itself?
Thread Starter
TECH Fanatic
Joined: Sep 2002
Posts: 1,505
Likes: 0
From: -TeXaS-?
Re: What stall for me?? H/C/Boltons Not really. I stall at 1500 and smash it. Ive always wanted to stall more than that but people usually tell me the Vig likes it at 1500. I have stock suspension but I have
Wolfe Torque Arm
Subframe Connectors
Eibach 1.5 Lowering Springs ON ORDER!
What should I set the pressure at with 26X11.5X16 MT ET Streets? What should I stall at with this 3000?
What about when I get the 4000?
Please help guys I cut 12.0's with high 1.70's to low 1.80's
Wolfe Torque Arm
Subframe Connectors
Eibach 1.5 Lowering Springs ON ORDER!
What should I set the pressure at with 26X11.5X16 MT ET Streets? What should I stall at with this 3000?
What about when I get the 4000?
Please help guys I cut 12.0's with high 1.70's to low 1.80's
Thread Starter
TECH Fanatic
Joined: Sep 2002
Posts: 1,505
Likes: 0
From: -TeXaS-?
Re: What stall for me?? H/C/Boltons
I was thinking the same thing Colonel. How well is the car biting the track. When you launch do you feel any slippage at the wheels or in the tranny itself?
Re: What stall for me?? H/C/Boltons The Vig 3600 is want you want if you have a free restall or you want to stay in the Vig line.
A TCS 4000 or 4200, or a Yank TP 4400 will give you the results you are loking for.
A TCS 4000 or 4200, or a Yank TP 4400 will give you the results you are loking for.
Trending Topics
Thread Starter
TECH Fanatic
Joined: Sep 2002
Posts: 1,505
Likes: 0
From: -TeXaS-?
Re: What stall for me?? H/C/Boltons I want to stay in the Vig line. Ill probably go with a 3800 Stall(lol, I always have to go a little more than recommended)to see that I get what i want.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Re: What stall for me?? H/C/Boltons You want your converter stall speed 500 rpm below peak torque. You need to put your car on a dyno with the converter locked and determine your peak torque before deciding on a stall speed.