Which stall should i use?Vig-3200 or Yank PT3800
07-26-2003, 03:03 AM
#1
Teching In
Thread Starter
Join Date: Mar 2002
Location: Alabama
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Which stall should i use?Vig-3200 or Yank PT3800 I just ordered a new FLP level4 4L60E trans.Now here's my prob,Yank told me with my setup a prothruster 3800 would be perfect.FLP said that was to much stall and a VIG 3200 was more ideal.I have a 98 SS,all bolt-ons,125hp nos,12 bolt moser w/4:30 gears.I'm looking for any info,is one better than the other,what size stall is good,thanks. 
07-26-2003, 03:20 AM
#2
TECH Senior Member
Re: Which stall should i use?Vig-3200 or Yank PT3800 "FLP said that was to much stall and a VIG 3200 was more ideal."
That's strange that they said that considering that the Vig 3200 is also a 3800 stall (Vig underrates their stall speeds for some reason. If you want a 3200 Vig, you'll have to drop down to their 2800.)
Between those two converters, I'd opt for the Yank (better efficiency being the biggest reason.)
That's strange that they said that considering that the Vig 3200 is also a 3800 stall (Vig underrates their stall speeds for some reason. If you want a 3200 Vig, you'll have to drop down to their 2800.)
Between those two converters, I'd opt for the Yank (better efficiency being the biggest reason.)
07-26-2003, 04:48 AM
#3
Teching In
Thread Starter
Join Date: Mar 2002
Location: Alabama
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Re: Which stall should i use?Vig-3200 or Yank PT3800 Thanks Colonel,I've been beating my head trying to decide which route to take.My SY3500 has kicked *** but its time to upgrade!I'll let YANK continue to yank me off the line!!!!
