Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Hard pull when shifting into drive...

Old Apr 8, 2008 | 09:34 PM
  #1  
633997's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Oct 2007
Posts: 60
Likes: 0
Default Hard pull when shifting into drive...

Alright Im not yet too familiar with this so if you guys could help me out, My 95 Z28 is a A4 and I bought it used so as far as driveline,tranny mods I dont know, I also recently serviced the tranny. When I shift into drive from park the car pulls/jerks forward hard, its like a quick shove forward, what can this be...or what can be causing this,any other thing/mods i dont know of? Only mods Ive done are simple engine related bolt ons.Thanks.

Last edited by 633997; Apr 8, 2008 at 09:40 PM.
Reply
Old Apr 8, 2008 | 10:22 PM
  #2  
Hell'sChariot's Avatar
TECH Regular
iTrader: (24)
 
Joined: Nov 2004
Posts: 495
Likes: 0
From: Omaha
Default

Sounds like someone turned up the trannys line pressure. Take it to a tuner and have them lower it and see if that fixes it.
Reply
Old Apr 9, 2008 | 11:29 AM
  #3  
th3brandon's Avatar
Launching!
 
Joined: Dec 2007
Posts: 208
Likes: 0
From: DeLaWaRe
Default

my car does the same thing its a nice hard jerk... i dont know if this is bad for the tranny or not but i belive like said in the above post its the line pressure... could a shift kit also have anything to do with it.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:10 PM.