What Tools Are Need
3 feet or more of extensions and a swivel 3/8 drive to undo tranny
13mm for the tranny bolts
the torque converter to flexplate bolts are different on some cars but 16mm is what i know
13 mm for the starter
not sure on the rest but they are all pretty common tools if you have a good set
and it is easier to use a 15/16 socket on the crank pulley to turn the motor so you can get to the three bolts holding the converter
13mm for the tranny bolts
the torque converter to flexplate bolts are different on some cars but 16mm is what i know
13 mm for the starter
not sure on the rest but they are all pretty common tools if you have a good set
and it is easier to use a 15/16 socket on the crank pulley to turn the motor so you can get to the three bolts holding the converter
8MM allen head on a 2000 year converter bolt--no hex. If it had a hex head it would be 15mm.
A 10mm socket and something to remove the O2 sensors with as well, better remove them to not risk damaging one.
A 10mm socket and something to remove the O2 sensors with as well, better remove them to not risk damaging one.
