I am going to SLP day this weekend and wanted to know the best way to launch with this converter? I would launch at 1200 rpm with the stock converter. Tell me what is the best way guys I want some 12's Launch off idle or not?

 

1100 RPM'S . My best 60 with 2800 VIG. is 1.67 . Car weighs 3750 with driver . Good Luck!

 

I leave at 1100 rpms also but I have a 3200 vig. I have noticed these converters really like to be flashed at just off a idle to get the best 60fts.

 

Flash.

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 02 Pewter LS1:
<strong> I am going to SLP day this weekend</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Sweet! I'll be there too. I haven't been to the track either since my Vig install, so I'm wondering about it too. I do know that on the street, no matter how I launch, I can't get traction to save my life. I have to let out like four times before I hit second gear. Good luck down there, and I hope I see ya.

 

Right off idle. I have done extensive testing. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

 

2000 rpm's then flooring it <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Thats with a Vig. 3200 and got consistant 1.52 60ft's.

I use to do it right off idle then flash it but was getting 1.62 60ft's.

Just try different things,one way might work better than another.

btw: this is with E.T. Streets.

 

Hey Guys thanks again for all the great replys <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

Hey NickMapleT/A Look for me out there I have a 02 Pewter Z License plate 02 LS1 hope to see you there.

What psi do I want to runs the drag radials at?

 

Whats "flashed" ??

 

When the engine reaches the stall's speed, it engages, aka "flashing"

 

Holy **** ..... this post is almost 3 yrs. old !