Park to Drive problem
Thread Starter
TECH Addict
Joined: Mar 2002
Posts: 2,189
Likes: 0
From: Glendale, CA
Park to Drive problem I recently installed the TCI shift kit p/n# 376002.
Install was very easy. Took it off the stands and put in reverse, quicker and sort of moved the car when going into reverse. Then wehn I put it into drive, car jerks rather harshly going into drive. Shifts are fine though. The jerk mellows out a little after it heats up to normal temps, but when it's cold it really jerks hard.
Anyone having these problems or can suggest anything?
Install was very easy. Took it off the stands and put in reverse, quicker and sort of moved the car when going into reverse. Then wehn I put it into drive, car jerks rather harshly going into drive. Shifts are fine though. The jerk mellows out a little after it heats up to normal temps, but when it's cold it really jerks hard.
Anyone having these problems or can suggest anything?
On The Tree
Joined: Jan 2003
Posts: 170
Likes: 0
From: Pontotoc, MS
Re: Park to Drive problem That is very normal with the TCI Trans-Scat kit. I hope you like the kit. If you have any more questions you can call 1-662-224-8972.
Kevin Steele
TCI
Product Engineer
Kevin Steele
TCI
Product Engineer
