LS1TECH - Camaro and Firebird Forum Discussion
CHASSIS, SUSPENSION, APPEARANCE
Automatic Transmission
Fuddle Bolts Question

Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits

Sponsored by:

Fuddle Bolts Question

Reply Subscribe

Search this Thread

Old

Aug 1, 2008 | 06:54 PM

#1

Thread Starter

12 Second Club

iTrader: (3)

Joined: May 2008

Posts: 229

Likes: 0

From: VA

Default

Fuddle Bolts Question

Do the Fuddle Torque Converters come with different bolts for the Converter to Flexplate bolts? If so, what size? I bought a used Fuddle 4K stall and I can't get the factory bolts to start to the Fuddle converter.

Thanks in advance. I wish I had thought to check before I put the transmission back on.

Old

Aug 1, 2008 | 07:49 PM

#2

Banned

iTrader: (36)

Joined: Jun 2004

Posts: 3,760

Likes: 2

From: garland tx

Default

the fuddle bolts are the same thread as the stock ones...simply put your stockers should work..if not goto lowes and they are the same as stock just grade 10 metric i think

could be wrong on the grade/metric part though

Old

Aug 1, 2008 | 11:06 PM

#3

Thread Starter

12 Second Club

iTrader: (3)

Joined: May 2008

Posts: 229

Likes: 0

From: VA

Default

Huh. My stock ones won't go in. The holes line up, but it feels like it's trying to crossthread. When I try them on the stock converter, they go in perfectly.

Old

Aug 1, 2008 | 11:20 PM

#4

TECH Apprentice

iTrader: (3)

Joined: Jul 2007

Posts: 308

Likes: 0

Default

I had to use some differnt bolts for my PTC, got them from a local speed shop and the guy cleaned up the holes too.

Old

Aug 2, 2008 | 09:29 AM

#5

Thread Starter

12 Second Club

iTrader: (3)

Joined: May 2008

Posts: 229

Likes: 0

From: VA

Default

Thanks. I'm going to pull the tranny again to get a better look at the TC.

Old

Aug 2, 2008 | 10:57 AM

#6

Banned

Joined: Apr 2006

Posts: 51

Likes: 0

From: IN SIN

Default

I'd say call fuddle to get the right bolts........Good luck!

Old

Aug 2, 2008 | 11:54 PM

#7

Thread Starter

12 Second Club

iTrader: (3)

Joined: May 2008

Posts: 229

Likes: 0

From: VA

Default

I found out the stock bolts were 10mm x 1.5. The fuddle bolt holes were 3/8 - 16 just in case anyone else was wondering.

Reply Subscribe

bolts, converter, fuddle, kind, size, stall, torque

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 10:13 AM.