CTS-V UUC Shifter
02-03-2009, 07:01 AM
#1
Teching In
Thread Starter
Join Date: Oct 2006
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
CTS-V UUC Shifter I just bought an "04 V which supposedly has a UUC shifter. However, it has a large amount of slop in it. When in any gear, it can wiggle side to side over an inch. This doesn't seem right. Does anyone know if this is normal for this shifter. Any ideas on how to confirm if it actually is a UUC? I had a UUC on an Audi S4 and it was great. I also drove a V with a B&M and it was also really slick. I am hoping I can just replace a part or tighten something to fix it.
Thoughts?
Thoughts?
02-03-2009, 07:28 AM
#3
TECH Resident
iTrader: (9)
Join Date: Jun 2008
Location: Mile High
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Here you go: Pics of the UUC shifter and the Bushings you need: https://ls1tech.com/forums/10952041-post9.html
Pics of where the bushings are can be seen here (2nd page) http://www.cadillacforums.com/forums...installing-uuc
Bushings can be had here:
Luke Butler
Lindsay Cadillac
(703) 647-8670
lbutler@lindsaycadillac.com
Pics of where the bushings are can be seen here (2nd page) http://www.cadillacforums.com/forums...installing-uuc
Bushings can be had here:
Luke Butler
Lindsay Cadillac
(703) 647-8670
lbutler@lindsaycadillac.com
Last edited by deedubb; 02-03-2009 at 07:34 AM.
02-03-2009, 10:06 AM
#4
TECH Addict
iTrader: (5)
Join Date: Oct 2004
Location: NE Texas
Posts: 2,119
Likes: 0
Received 0 Likes
on
0 Posts
Deedubb's on fire today.
The UUC is supposed to be more stock like than the B&M and the Katech. That said, I'm thinking the bushings are bad like deedubb suggested.
The UUC is supposed to be more stock like than the B&M and the Katech. That said, I'm thinking the bushings are bad like deedubb suggested.
