Put on new tires and now problems
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Put on new tires and now problems
ok so yesterday i put on my summer tires and now im having some issues. first off 1 of my tpms sensors is reading 0 psi. i tried the relearn at my work the sensor responds but reads 0 psi??? the second is now i cant go into comp mode. the traction control still works and the stability control works. when i hit the tc button it just turns off then hit it again within the 2 seconds it just turns right back on..
the tires are uniroyal gtz 275/40/18 rear and 245/45/18 front
any help would be nice
thanks
the tires are uniroyal gtz 275/40/18 rear and 245/45/18 front
any help would be nice
thanks
#2
11 Second Club
iTrader: (5)
Join Date: May 2009
Location: Pittsburgh
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
I have learned from working on cars with TPMS that when your replacing tires your best bet is to put the wheels back where they were to reduce the likelyhood of problems. My first guess would be that the one of the sensors was damaged in the dismounting/mounting process.
#3
TECH Fanatic
iTrader: (12)
i agree with stippy.
http://cgi.ebay.com/ebaymotors/GM-GM...Q5fAccessories
that trigga got one for 30 shipped.
i broke two and just got rid of all 4.
http://cgi.ebay.com/ebaymotors/GM-GM...Q5fAccessories
that trigga got one for 30 shipped.
i broke two and just got rid of all 4.
#4
Teching In
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I have learned from working on cars with TPMS that when your replacing tires your best bet is to put the wheels back where they were to reduce the likelyhood of problems. My first guess would be that the one of the sensors was damaged in the dismounting/mounting process.