kooks install in the dmv area
#21
TECH Apprentice
Thread Starter
Join Date: Sep 2010
Location: Southern MD
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah I was melting a few wired on the driver side, but autozone wrap cleaned that right on up.. how long were u driving it before it melted all the way through?
#23
TECH Fanatic
iTrader: (8)
Join Date: Jun 2010
Location: Helendale
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
All this happened about 2 weeks a go. So, it took 14 months and 17,651 miles.
#24
TECH Fanatic
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
biggie if you feel like driving to PA i'll help you do the clutch and headers. could probably rent my dad's buddies garage off of him.
For what it's worth, i'm the self titled pro at pulling this car's transmission. From jack to jack I can have it out in about 45 minutes to 1 hour 15 minutes. I've done it WAY too much.
For what it's worth, i'm the self titled pro at pulling this car's transmission. From jack to jack I can have it out in about 45 minutes to 1 hour 15 minutes. I've done it WAY too much.
#25
TECH Apprentice
Thread Starter
Join Date: Sep 2010
Location: Southern MD
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
@cole yeah ima wrap them id rather pay 25 bucks on protecting wires than 800 replacing parts.. but I have kooks 1 3/4 headers.. kinda spacious there.. the main thing I'm worried about is the starter on the passenger side..
#26
TECH Fanatic
iTrader: (8)
Join Date: Jun 2010
Location: Helendale
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Whisler had 3/4s on his, same issue. Mainly the driver side is were the problems will be, since that's where the steering rack is. Just give them a good wrap, and tie back all the wires, and possibly wrap them as well. Do that, and you should be fine.
#27
TECH Apprentice
Thread Starter
Join Date: Sep 2010
Location: Southern MD
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
will do.. thanks man!! btw i will be home in texas soon if u are down to grab some coffee or something.. unfortunately the v womt be with me