CTSVBiggie

iTrader: (1)

I am going to guess you will make about 5749 Monkey Powers to the wheels with no correction factors.

ColeGraham

iTrader: (8)

K&N, Kooks 1 7/8, Magnaflow - 354hp/370tq Corrected

This was done at the end of August, north of Fort Worth, TX. Temp outside was about 95-98F and Dew Point was in the 67-69F (36-43% RH) outside. Temp and humidity inside was 85.3F and 31%

jcollege

iTrader: (2)

Where are you getting your tune done, looking to get mine tuned soon also.

CTSVBiggie

iTrader: (1)

Me 3... should be ordering a PatG speced cam and dual springs this week.... Then install those and headers.... Yummy fun.

vmapper

iTrader: (8)

?? what ??

if you look at Stone17 dyno sheet.. it has STD: 1.03 (so using the STD formula for Correction) the curve you see, including the peak numbers have an ADDED value of 3% to the RAW Uncorrected number.

CTSVBiggie

iTrader: (1)

Notice my measurment scale.... Monkey powers... in this car monkey power should be taken at about .0666 HP = 1 MONKEY power

vmapper

iTrader: (8)

And what is your point? besides being ignorant about how dynos work and how to interpret their readings. Perhaps its too much for you to understand... sorry I tried.

CTSVBiggie

iTrader: (1)

it was meant more as a joke. Seeing your obvious LACK of a sense of humor, I have NO clue as to what he will dyno. But I actually have a fairly decent background in Dynos and their numbers/correction factors. Why I would NEVER want anything but raw uncorrected data.

Now stop monkeying about and someone post what he is actually going to make at the wheels to within a tenth...

vmapper

iTrader: (8)

sorry Biggie, ill be more lax... I thought at first it was just jokin, but...wasnt sure...
So when are YOU going to get that cam in and change your monkies into apes?

CTSVBiggie

iTrader: (1)

Ordering a cam(pat G) with dual springs and steel retainers in the next few days. And then god knows when I have a free weekend to install everything. Gonna be enlisting a lot of mech type friends to get it done right and quickly....

God knows who I will get to tune the car... Im hoping to break 410whp...

babrown18

I'm getting the tune up in deleware the owner of the shop has a v and knows wtf he is doing.. a buddy of mine had a 10 second g8 gt tuned by him.. he is on tech as SLOW SEDAN.

RACE PROVEN MOTORSPORTS
130 Hickham rd Unit 28-30
Claymont DE 19703
302 798 4000

liqidvenom

iTrader: (2)

what does a cam setup from pat run for, i already have the specs i would like to run.

itsslow98

iTrader: (18)

Thats who does my tuning, and the TUNER has a V not the owner lol. They are great guys and I recommend them to anyone with an LSX. Well worth the ride, i will be heading up ina week or two to get my mustang on the dyno for a full tune, they sent me a base tune for the time being.

babrown18

Sounds good.. yeah bro how's the ls1 mustang coming along? I saw the first startup on youtube

itsslow98

iTrader: (18)

just finished welding up the exhaust last night, just two or three small things and its tiem to drive it. hoping for 415+ on the dyno and maybe a high ten second pass if I can manage to not break an axle!

babrown18

Hell yeah good luck with that

ColeGraham

iTrader: (8)

i am betting you will run a 13.4

CTSVBiggie

iTrader: (1)

Cute.. Do you two bicker in bed like this too?

LOL

when is the dyno... tired of guesses and offtopic..

ColeGraham

iTrader: (8)

only when your mom is there...becuase it aint gay if its in a 3 way.

3-Way (The Golden Rule)

CTSVBiggie

iTrader: (1)

Having sex with or near the cremated remains of my mother would be sick on a WHOLE new level.... :vomit: